Certificate Signing Request (CSR) Generation Instructions for Citrix Access Gateway 8.0

Solution ID:    SO6898    Updated:    10/09/2014

Solution

The following steps are for generating a Certificate Signing Request (CSR) for a Citrix Access Gateway (CAG) 8.0 appliance:

  1. In the GUI configuration tool, go to SSL --> CA Tools

  2. Click Create RSA Key in the right pane (do not use the <Certificate wizard> link shown on the SSL page)
     
  3. Enter the Key Filename e.g. filename.key ; Key Size: 2048 ; Keep PEM as the key format and select DES3 for the PEM encoding algorithm ; Enter the PEM passphrase to protect the private key. Click Create, then Close



  4. Click Create Certificate Request on the CA Tools page. Type e.g. filename.csr for the request file name and e.g. filename.key for the key file name. Re-enter the PEM passphrase you created in the previous step
     
  5. Click Create and then click Close



  6. The filename.csr file now resides on the appliance in the /nsconfig/ssl directory.

 

This solution is referenced from the following link:  http://support.citrix.com/article/CTX113627

Legacy ID

vs44135

Disclaimer:

Terms of use for this information are found in Legal Notices

Contact Support

Find Answers